Most electric construction machines so far are conversions in spirit: the diesel engine comes out, a battery and motor go in, and that motor drives the same hydraulic pump as before. The Bobcat T7X took a different route when it appeared at CES in 2022. It has no hydraulic system. The lift arms and bucket are moved by electric actuators, and the tracks by electric drive motors.
Why that matters
A conventional compact track loader carries a large volume of hydraulic oil, plus hoses, pumps, filters and coolers. All of it leaks eventually, and all of it needs servicing. The T7X replaces that with sealed electric components. Bobcat’s figures describe a machine with a small fraction of the fluid of its diesel equivalent.
For work inside food plants, warehouses or greenhouses, where a burst hose means a contamination incident, that is a real advantage beyond emissions and noise.
The electric system also draws power only while the machine is working. A diesel loader idles through much of the day and burns fuel doing it.
The numbers
- Battery: 72.6 kWh lithium-ion
- Runtime: Bobcat says up to six hours of continuous operation on a charge
- Rated operating capacity: about 3,050 lb
- Operating weight: about 11,970 lb, roughly 1,000 lb more than the diesel T76 it is modelled on
“Continuous” is doing some work in that runtime figure. Loaders rarely run flat out for hours, so six hours of continuous use can stretch across a full shift of typical stop-and-start work. Heavy attachments that demand constant power will shorten it.
Charging
The T7X charges from a standard J1772 connector, the same one used by most Level 2 car chargers. On a 240-volt, 40-amp supply, a full charge takes about 12 hours.
That is the constraint to plan around. It works as an overnight machine: use it during the day, plug it in at the yard, start full the next morning. There is no quick top-up at lunch on that kind of supply, and a site without 240-volt power can’t keep it going.
Controls and attachments
Bobcat kept the controls consistent with its diesel machines, so an experienced operator can get in and work. Electric drive brings fine control at low speed and full torque from a standstill.
Bobcat has also been developing electric attachments, among them an auger, a grapple and an angle broom, with a snow blower shown in testing. Check which of the attachments you rely on are available and compatible before assuming your existing set will carry over.
Its sibling
The S7X is the wheeled skid-steer version and shares about 95 percent of its parts with the T7X. Wheels take less energy to move than tracks, so Bobcat quotes a longer runtime for it, around eight hours. If your work is on pavement or concrete, it may be the better machine.
For Canadian buyers
Cold. Ask the dealer for expected runtime at winter temperatures and whether the machine conditions its battery while plugged in. Snow removal is steady, heavy work in exactly the conditions batteries like least.
Availability. Electric Bobcats have been offered largely through rental channels and selected dealers. Renting one for a real job is the sensible first step.
Cost. Expect a significant premium over a diesel T76. The case for it rests on lower energy and maintenance costs, on contracts that require low-emission equipment, and on jobs a diesel machine can’t do at all.